Loading... Please wait...

Our Newsletter

Carbody Spray Film 5 Litres - 1 x 5l Canister

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
4.84 KGS
Calculated at checkout

Product Description

Product information

Our newly developed FOLIATEC.com Carbody Spray Film is the new generation of removable car body coatings. The Carbody Spray Film is not only suitable for professional and large-surface application on complete vehicles, but also for rims, mirrors, motorcycles and many more. FOLIATEC.com is one of the first producers who offers metallic colours which are ready to spray. Ready to use for spray nozzles between 2.0 and 2.5 mm the Carbody Spray Film can be applied like a normal lacquer on car bodies by using a spray gun or our FOLIATEC.com Spray System. And the best: the applicated coating can be removed easily anytime without any helping tool.

  • ready to use
  • sufficient for partial coating of automobiles and full coating of two-wheeled vehicles
  • very good opacity
  • appealing appearance and a smooth spray result
  • protection from scratches, salt, weather conditions and stone chipping on the original paint 
  • UV resistant
  • applicable on any non-absorbent surface
  • easy to remove
  • 1 litre is sufficient for a max. approx. 2 sqm area

Product tip: Optimal in combination with our FOLIATEC.com Carbody Spray Film Thinner to adjust the viscosity.


  • All car parts that can be easily removed should be dismantled. Mask all surfaces that are not to be coated. Mask rubber seals with tape. You should also protect wheel housings and the car underbody from spray mist.
  • Clean and dry the surface to be sprayed, including edges, then degrease using silicone remover. After cleaning, remove the remaining dust with a duster.
  • Application with FOLIATEC.com spray system: Apply the FOLIATEC.com carbody spray film in 4 to 5 generous layers. On horizontal surfaces (roof or bonnet), work at a slow pace and at level 1 or 2. On vertical surfaces, work at a medium pace and level 2. Only use in suitable workshops and garages. Reduce ventilation if working in a spray booth.
  • Application with spray gun: Apply the FOLIATEC.com carbody spray film in 3 generous layers at medium speed. Use a 2–2.5mm spray nozzle with 3–5 bar pressure in a suitable spray booth.
  • Flash off for 10 minutes after every spray coating, done.

Note: After 60 minutes the Carbody Spray Film is dust-dry. After 24 hours the vehicle is ready to drive again.

For further instructions read the application sheet!

Application sheet

Download application sheet

Frequently asked

What can I spray with FOLIATEC.com CARBODY SPRAY FILM? All smooth, non-absorbent and solvent resistant surfaces can be sprayed with FOLIATEC.com CARBODY SPRAY FILM.

Where should FOLIATEC.com CARBODY SPRAY FILM be used? We recommend using the spray film in a spray booth or a suitable garage or workshop.

How many coats of FOLIATEC.com CARBODY SPRAY FILM should be applied? At least four coats should be applied with the FOLIATEC SPRAY SYSTEM powered by WAGNER. The first coat should be sprayed on very finely; all further coats should be applied generously and uniformly.

Does the surface need to be sanded? No. Sanding the surface would make the FOLIATEC.com CARBODY SPRAY FILM difficult to remove.

Is FOLIATEC.com CARBODY SPRAY FILM car wash-proof and would it withstand high pressure washing? FOLIATEC.com CARBODY SPRAY FILM is suitable for textile car wash systems that do not use hard brush cleaning. For a longer lifespan, we recommend washing the car at a washing station using a high pressure washer (minimum distance 40cm) and foam lance.

How do I repair small damages to the FOLIATEC.com CARBODY SPRAY FILM? Small damages can be simply dabbed away. The FOLIATEC.com CARBODY SPRAY FILM will bind with the old coat.

What can remove spray mist or light metallic residue? Spray mist and residue can be rubbed away using FOLIATEC.com THINNER (item no. 20859) or silicone remover and a soft cloth.

Is the FOLIATEC.com SPRAY SYSTEM complicated to use? No. No practice is necessary for using the FOLIATEC.com SPRAY SYSTEM. Anybody who follows the operating instructions (included) will achieve excellent results!

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Carbody Spray Film 5 Litres - 1 x 5l Canister to your wish list.

You Recently Viewed...